Especificaciones de Isotanques
Dimensions | 20' x 8' x 6'8" |
Capacity | 24,000 - 26,000 litres |
Max Gross Weight | 34,000 kg |
Tare Weight | 3,900 - 4,350 kg |
Calculation pressure Test pressure Working pressure |
6.0 Bar 6.0 Bar 4.0 Bar |
External Vacuum pressure | 0.40 Bar |
Design Temperature | 120 C |
Vessel Material | 316 Stainless steel low carbon, <0.03% Shell: 4,6 mm - Ends: 5,9 mm |
Frame Material | Carbon Steel |
Approvals | US/UK D.O.T. IMO 1, ADR/RID, C.S.C., TIR, U.I.C., BAM, A.A.R. 600, F.R.A. |
Manlid | 1 x 500 mm, 8 point fixed |
Safety Relief valves | 2" BSP screwed and flanged; provision for the future fitting of bursting disc |
Airline outlet | 1 " ball valve and gauge and 1 " BSP capped |
Bottom outlet | 80 mm, 30foot valve, 80mm butterfly valve with 3" BSP threaded connector closed by st. cap and retaining cable |
Top discharge | Provision 3" flange |
Steam Heating | 8 runs st.st. (ASTM A240 316) channels welded to base of tank; manifold; inlet/outlet pipes screwed and capped " BSP Press test: 6 Bar Press Working: 4 Bar |
Gasket Material | PTFE |
Insulation | 15 mm Rockwool, 70 mm Polyurethane |
Cladding | Shell from 0,8 mm thick natural aluminium (grade 5251) with lapped sealed joints |
Thermometer | yes |
Walkway | One or two longitudinal full length panels 475 mm wide, either side of manyway areas. Including top longitudinal protection handrails. |
Ladder | Painted, 300 mm wide on right hand rearside |
Top boxes | 2 off to enclose manlid area hinged to front end |
Compartment | 1 |